Hydration is an essential factor in maintaining lush green grass. This is certainly relevant during the summer when the heat severely strains the lawn. The reticulation system must be in excellent operating condition to keep the lawn properly watered. Compared to hose watering, an automated reticulation system saves money, time, and water while watering the lawn more equally.
However, your irrigation system may have a few difficulties here and there. It is possible that a sprinkler head has been damaged or that the water pressure is insufficient.
In this post, we’ll go over the most common issues with Perth reticulation systems, how to fix them, and why hiring the best reticulation specialists Perth may also be a viable alternative for repairs.
How to Repair Common Reticulation System Issues
Repairing reticulation issues in Perth may be stressful and time-consuming, particularly if you lack experience. Some of the most common issues are:
Replacing Damaged Sprinkler Heads
Sprinkler heads are easily cracked and broken. Because regular sun exposure deteriorates the plastic shell over time, the first thing you must do is examine for apparent signs of wear and tear. If the sprinkler head is too high, they may be driven over by lawn mowers, so keep an eye out for that.
When you’ve found a damaged sprinkler head, switch off the system and carefully dig around it. Using a hand drill, take the head out from the riser. Connect the new head, tighten it down, and check it before reinstalling the dirt on the riser.
Water Pressure Testing
Reticulation systems need enough water pressure to water a lawn equally. It’s a good practice to monitor the water pressure regularly so your sprinklers can adequately hydrate the lawn. The initial testing is static pressure, which assesses the amount of pressure in a sprinkler system while it is not in use.
Quickly use a pressure gauge to check the sprinkler system’s downstream and upstream pressure. This test can ideally be performed in the morning when the pressure reaches its lowest. This guarantees that the pressure gauge reads correctly.
The test that follows is a simple water pressure test. Connect the pressure gauge to the valve furthest away from the connecting point while the sprinklers operate. If a certain location is causing you problems, try that head first.
For most irrigation systems, the optimal water pressure must be approximately 30-50 psi. Therefore, keep these values in mind while checking the system’s water pressure.
Addressing Leaks
Subsurface irrigation lines often cause sprinkler system leaks. Addressing this issue by yourself might be tough, so it’s better to hire reticulation specialists Perth to dig up your yard and locate the source of the leak.
Once the cause has been determined, an expert will replace a part of the pipe with a new one. The entire pipe may need to be repaired based on the severity of the leak. Reticulation controllers Perth will also inspect the sprinkler heads for leaks to see whether they are the source of the issue.
Taking Care Of Blocked Sprinkler Heads
Sprinkler heads are often blocked with debris, mud, and dirt. This might cause inconsistent lawn watering, so you need to address it quickly. When a sprinkler head sprays water irregularly, it is blocked.
Begin by digging out and removing the obstructed sprinklers from the riser. To remove the sprinkler head, pull it from the canister. A filter or a screen can be found within the head. Clean the filter with an old toothbrush underneath running water to brush off any dirt, grass, or other trapped particles.
After properly cleaning the filter, reassemble the sprinkler head and check it to ensure it sprays water uniformly.
Hiring Reticulation Specialists
While it’s fantastic that you can do maintenance and repairs on the reticulation system, difficulties might arise from time to time. If you frequently have low water pressure and single zone problems, leaving it to the pros may be better.
Why Hire Reticulation Specialists?
Reticulation specialists Perth provide expert reticulation repairs. Their area of expertise is the resolution of reticulation problems in commercial and residential systems. There are several reasons to engage reticulation specialists Perth, and here are a few of them:
Their Credibility
They are the leading national industry in all sectors, from water consumers to installers, designers, consultants, higher education institutions, authorities, retailers, and manufacturers.
For the total peace of mind of all customers, they are entirely covered with vehicle insurance, workers’ compensation, and public liability.
They Have The Right Equipment
They offer updated irrigation repair equipment to monitor and trace wire, detect controller faults, and retic solenoid valves. This saves a lot of time during reticulation repairs and reduces the likelihood of your garden being dug up!
They Care
They value our customers and conduct customer satisfaction surveys weekly to evaluate the effectiveness of their field team. They strive to think from the customer’s perspective rather than our own. They respect their customers and endeavour to provide them with excellent service.
Conclusion
If you’re seeking reticulation specialists Perth, go beyond the best service. With decades of knowledge and experience, their team of professionals can treat and diagnose even the most challenging irrigation issues.
Furthermore, they are all aware of the importance of a reticulation system to the health of the lawn. As a result, you must maintain it in peak condition.